AC Power Cord Specifications for a QFX3100 Director Device

Detachable AC power cords are supplied with the QFX3100 Director device. The coupler is type C13 as described by International Electrotechnical Commission (IEC) standard 60320. The plug at the male end of the power cord fits into the power source outlet that is standard for your geographical location.

Caution: The supplied AC power cord for the switches is intended for use with the QFX3100 Director device only and not for any other use.

Note: In North America, AC power cords must not exceed 4.5 meters (approximately 14.75 feet) in length, to comply with National Electrical Code (NEC) Sections 400-8 (NFPA 75, 5-2.2) and 210-52 and Canadian Electrical Code (CEC) Section 4-010(3). The cords supplied with the QFX3100 Director device are in compliance.

Table 1 lists AC power cord specifications provided for each country or region.

Figure 1 illustrates the plug on the power cord for some of the countries or regions listed in Table 1.

Figure 1: AC Plug Types