Technical Documentation
Related Documentation
- EX Series
- AC Power Supplies in an EX6200 Switch
- AC Power Electrical Safety Guidelines
- AC Power Disconnection Warning
- General Electrical Safety Guidelines and Warnings
- Connecting AC Power to an EX6200 Switch
- QFX Series
- AC Power Electrical Safety Guidelines
- AC Power Disconnection Warning
- General Electrical Safety Guidelines and Warnings
AC Power Cord Specifications for an EX6200 Switch
Each AC appliance inlet on the AC power supply requires a dedicated AC power feed. Most sites distribute power through a main conduit that leads to frame-mounted power distribution panels, one of which can be located at the top of the rack that houses the switch. Each AC power cord connects the power supply to the power distribution panel.
Each detachable AC power cord is 2.5 meters (approximately 8 feet) long. The appliance coupler at the female end of the cord inserts into the AC appliance inlet on the faceplate of the AC power supply. The coupler type is C19 as described by the International Electrotechnical Commission (IEC) standard 60320. The plug at the male end of the power cord fits into the power source outlet that is standard for your geographical location.
 | Note: In North America, AC power cords must not exceed 4.5 meters (approximately 15 feet) in length, to comply with National Electrical Code (NEC) Sections 400-8 (NFPA 75, 5-2.2) and 210-52 and Canadian Electrical Code (CEC) Section 4-010(3). The cords shipped with the switch are in compliance. |
Table 1 lists the AC power cord specifications for an EX6200 switch for the countries and regions listed in the table.
Table 1: AC Power Cord Specifications for an EX6200 Switch
Country/Region | Electrical Specifications | Plug Standards | Juniper Model Number | Graphic |
|---|---|---|---|---|
Argentina | 250 VAC, 16 A, 50 Hz | IRAM Type RA/3/20 | CBL-EX-PWR-C19-AR | No graphic available |
Australia | 250 VAC, 15 A, 50 Hz | AS/NZS 3112 Type SAA/3/15 | CBL-EX-PWR-C19-AU |  |
Brazil | 250 VAC, 16 A, 50 Hz | NBR 14136 Type BR/3/20 | CBL-EX-PWR-C19-BR | No graphic available |
China | 250 VAC, 16 A, 50 Hz | GB 1002 Type PRC/3/16 | CBL-EX-PWR-C19-CH |  |
Europe (except Italy, Switzerland, and United Kingdom) | 250 VAC, 16 A, 50 Hz | CEE (7) VII Type VIIG | CBL-EX-PWR-C19-EU |  |
India | 250 VAC, 16 A, 50 Hz | SABS 164/1 Type ZA/3 | CBL-EX-PWR-C19-IN | No graphic available |
Israel | 250 VAC, 16 A, 50 Hz | SI 32 Type IL/3 | CBL-EX-PWR-C19-IL |  |
Italy | 250 VAC, 16 A, 50 Hz | CEI 23-16 Type I/3/16 | CBL-EX-PWR-C19-IT |  |
Japan | 250 VAC, 16 A, 50 Hz | NEMA 6–20 Type N6/20 | CBL-EX-PWR-C19-JP |  |
NEMA L6–20 Type NEMA Locking | CBL-EX-PWR-C19-JPL |  | ||
125 VAC, 15A, 50 Hz | NEMA 5-20 Type N5/20 | CBL-EX-PWR-C19-JP110V | No graphic available | |
Korea | 250 VAC, 16 A, 50 Hz | CEE(7) VII Type VIIG | CBL-EX-PWR-C19-KR | |
North America | 250 VAC, 16 A, 50 Hz | NEMA 6–20 Type N6/20 | CBL-EX-PWR-C19-US | |
NEMA L6–20 Type NEMA Locking | CBL-EX-PWR-C19-USL | | ||
125 VAC, 20 A, 50 Hz | NEMA 5–20 Type N5/20 | CBL-EX-PWR-C19-US-20 |  | |
South Africa | 250 VAC, 16 A, 50 Hz | SABS 164/1 Type ZA/3 | CBL-EX-PWR-C19-SA |  |
Switzerland | 250 VAC, 16 A, 50 Hz | SEV 5934-2 Type 23G | CBL-EX-PWR-C19-SZ | No graphic available |
Taiwan | 250 VAC, 16 A, 50 Hz | NEMA L6–20 Type NEMA Locking | CBL-EX-PWR-C19-TW | |
United Kingdom | 250 VAC, 13 A, 50 Hz | BS 1363/A Type BS89/13 | CBL-EX-PWR-C19-UK |  |
 | Caution: AC power cords for EX6200 switches are intended for use with this switch only and not for any other use. |
Power Cable Warning (Japanese) |
|---|
Warning: The attached power cable is only for this product. Do not use the cable for another product.  |
 | Warning: Power cords must not block access to switch components. We recommend that you route all AC power cord cables through the optional power cord tray provided with the switch. |
| Caution: The switch is pluggable type A equipment installed in a restricted-access location. It has a separate protective earthing terminal provided on the chassis in addition to the grounding pin of the power supply cord. This separate protective earth terminal must be permanently connected to earth ground. See Connecting Earth Ground to an EX Series Switch. |
Related Documentation
- EX Series
- AC Power Supplies in an EX6200 Switch
- AC Power Electrical Safety Guidelines
- AC Power Disconnection Warning
- General Electrical Safety Guidelines and Warnings
- Connecting AC Power to an EX6200 Switch
- QFX Series
- AC Power Electrical Safety Guidelines
- AC Power Disconnection Warning
- General Electrical Safety Guidelines and Warnings
