AC Power Cord Specifications for EX3200 Switches

A detachable AC power cord is supplied with the AC models. The coupler is type C13 as described by International Electrotechnical Commission (IEC) standard 60320. The plug at the male end of the power cord fits into the power source outlet that is standard for your geographical location.

Caution: The AC power cord provided with each switch is intended for use with that switch only and not for any other use.

Note: In North America, AC power cords must not exceed 4.5 meters (approximately 14.75 feet) in length, to comply with National Electrical Code (NEC) Sections 400-8 (NFPA 75, 5-2.2) and 210-52 and Canadian Electrical Code (CEC) Section 4-010(3). The cords supplied with the switch are in compliance.

Table 1 lists AC power cord specifications provided for each country or region.

Figure 1 illustrates the plug on the power cord for each country or region listed in Table 1.

Figure 1: AC Plug Types