- Download
Software
- Research a
Problem - Case Management
- Communities and Forums
- Contract & Product Management
- Technical Documentation Advanced Search
- Documentation Feedback Form
- Documentation Symbols Key
- End-of-Life Products
- Guidelines and Policies
- Security Resources
Juniper was the first North American IP routing vendor to achieve the prestigious TL 9000 certification by the Quality of Excellence for Suppliers of Telecommunications (QuEST) Forum in the router category, for design, development, provision and service and support.
What is J-Care?
It's the world-class service and support that you expect from a company that delivers the industry's best infrastructure and security products. With J-Care, you now have the confidence knowing that Juniper will do our part to keep you on top of the world!
- Downloads
- JCS1200 Chassis Lifting Guidelines
- Related Topics
- Definition of Safety Warning Levels
JCS1200 Chassis Lifting Guidelines
The weight of a fully configured chassis is about 350 lb (158.8 kg). Observe the following guidelines for lifting and moving the platform:
- Before moving the platform, read the guidelines in Overview of Preparing the Site for JCS1200 Platform Installation to verify that the intended site meets the specified power, environmental, and clearance requirements.
- Do not attempt to lift a fully configured platform by yourself. Using a mechanical lift to maneuver the platform into a rack is recommended. If a lift cannot be used, a minimum of four people must lift the platform, and you must remove components from the chassis before lifting.
- Before lifting or moving the platform, disconnect all external cables.
- As when lifting any heavy object, lift most of the weight with your legs rather than your back. Keep your knees bent and your back relatively straight and avoid twisting your body as you lift. Balance the load evenly and be sure that your footing is solid.
