AC Power Electrical Safety Guidelines

Caution: For services gateways with AC power supplies, an external surge protective device (SPD) must be used at the AC power source.

The following electrical safety guidelines apply to AC-powered services gateways:

• AC-powered services gateways are shipped with a three-wire electrical cord with a grounding-type plug that fits only a grounding-type power outlet. Do not circumvent this safety feature. Equipment grounding should comply with local and national electrical codes.
• You must provide an external certified circuit breaker rated minimum 15 A in the building installation.
• The power cord serves as the main disconnecting device. The socket outlet must be near the switch and be easily accessible.
• When a services gateway is equipped with multiple AC power supplies, all power cords (one for each power supply) must be unplugged to completely disconnect power to the switch.
• Note the following warnings printed on the label next to the power supplies:

  “CAUTION: THIS UNIT HAS MORE THAN ONE POWER SUPPLY CORD. DISCONNECT ALL POWER SUPPLY CORDS BEFORE SERVICING TO AVOID ELECTRIC SHOCK.”

  “ATTENTION: CET APPAREIL COMPORTE PLUS D'UN CORDON D'ALIMENTATION. AFIN DE PRÉVENIR LES CHOCS ÉLECTRIQUES, DÉBRANCHER TOUT CORDON D'ALIMENTATION AVANT DE FAIRE LE DÉPANNAGE.”

Power Cable Warning (Japanese)

The preceding translates as follows:

Warning: The attached power cable is only for this product. Do not use the cable for another product.