Technical Documentation

Tools and Parts Required to Replace TX Matrix Plus Hardware Components

To replace hardware components, you need the tools and parts listed in Table 1.

Table 1: Tools and Parts Required for Component Replacement

Components	Tool or part
All	Electrostatic discharge (ESD) grounding wrist strap
Power cables Power supply	7/16-in. (11 mm) nut driver or socket wrench Phillips (+) screwdriver, number 2
TXP-CB	Electrostatic bag or antistatic mat
Routing Engine	Electrostatic bag or antistatic mat
TXP-F13 SIB	Phillips (+) screwdriver, number 2 Blank panels (if component is not reinstalled) Electrostatic bag or antistatic mat
Fiber-optic array cables	Dust covers
Craft interface	5/16 in. nut driver
Air filter	Phillips (+) screwdriver, number 2
TXP-CIP	Phillips (+) screwdriver, number 2
Fan tray (front or rear)	Phillips (+) screwdriver, number 2