Tools and Parts Required to Provide Power to the T1600 Router

• DC-powered routers: 7/16-in. (11 mm) hexagonal-head external drive nut driver, with a torque range between 23 lb-in. (2.6 Nm) and 25 lb-in. (2.8 Nm), for tightening nuts to terminal studs on each power supply on a DC-powered router.

  Caution: You must use an appropriate torque-controlled tool to tighten the nuts. Applying excessive torque damages the terminal studs and the power supply. The absolute maximum torque that may be applied to this nut is 45 in-lb (5.0 Nm).

• AC-powered router:

  • Phillips (+) screwdriver, number 2 to access the metal AC wiring compartment
  • 1/4-in. slotted screwdriver to attach the ground wire and input terminal wires of the AC power cord.
• Electrostatic discharge (ESD) grounding wrist strap