Technical Documentation
Verifying the M320 Router Parts Received
A packing list is included in each shipment. Check the parts in the shipment against the items on the packing list. The packing list specifies the part numbers and descriptions of each part in your order.
If any part is missing, contact a customer service representative.
A fully configured router contains the router chassis with installed components, listed in Table 1, and an accessory box, which contains the parts listed in Table 2. The parts shipped with your router can vary.
Table 1: M320 Router Parts List for a Fully Configured Router
Component | Quantity |
|---|---|
Cable cover | 1 |
Cable guards | 2 upper, 2 lower |
Chassis, including midplane, craft interface, and rack-mounting brackets | 1 |
FPCs | Up to 8 |
PICs | Up to 4 per FPC |
SIBs | 4 |
Routing Engines | 1 or 2 |
CBs | 1 or 2 |
Power supplies | 4 |
CIP | 1 |
Front fan tray | 1 |
Rear fan tray | 1 |
Front air filter | 1 |
Rear air filter | 1 |
Quick start installation instructions | 1 |
Large mounting shelf | 1 |
Small mounting shelf | 1 |
Spacer bars | 2 |
Blank panels for slots without components installed | One blank panel for each slot not occupied by a component |
Table 2: M320 Router Accessory Box Parts List
Part | Quantity |
|---|---|
Affidavit for T1 connection | 1 |
Connectors for alarm relay cables | 2 |
DB-9 (male) to DB-25 (female) adapter | 1 |
ESD wrist strap with cable | 1 |
Ethernet cable, 15-ft length, to connect Routing Engine to management device | 1 |
PCMCIA card holder and hook-and-loop fasteners (male and female) | 1 of each |
DC Power and grounding cable lugs | 9 |
Read me first document | 1 |
Screws to fasten grounding cable to chassis | 2 |
Screws to mount chassis | Bag of 14 |
Serial cable, 6-ft length, to connect Routing Engine to management console | 1 |
Software license agreement | 1 |
Washers for grounding cable lug | 2 |
