Tools and Parts Required for Connecting the JCS1200 Platform

• 2.5-mm Phillips (+) screwdriver
• 7/16-in. hexagonal-head external drive socket wrench, or nut driver, with a torque range between 23 lb-in. (2.6 Nm) and 25 lb-in. (2.8 Nm), for tightening nuts to terminal studs on each power supply on a DC-powered router.

  Caution: Do not substitute a nonmetric nut driver or wrench. A tool that does not fit the nuts exactly can damage them. If a 10-mm. tool is not available, use pliers or an adjustable wrench.

• Wire cutters
• Pliers
• Electrostatic discharge (ESD) grounding wrist strap