Tools and Parts Required to Connect the M40e Management Devices

To connect the router to management devices and PICs and to power on the router, you need:

• Phillips (+) screwdrivers, numbers 1 and 2
• 2.5-mm flat-blade (-) screwdriver
• 7/16-in. hexagonal-head external drive socket wrench, or nut driver, with a torque range between 23 lb-in. (2.6 Nm) and 25 lb-in. (2.8 Nm), for tightening nuts to terminal studs on the circuit breaker box (on a DC-powered router)
• Wire cutters
• Electrostatic discharge (ESD) grounding wrist strap