Technical Documentation

TX Matrix Plus TXP-F13 SIB LEDs

The TXP-F13 status LEDs (Figure 1) are located below the ONLINE/OFFLINE buttons. Table 1 describes the functions of these LEDs.

Figure 1: TXP-F13 SIB LEDs

Table 1: TXP-F13 SIB LEDs

Label	Color	State	Description
ACTIVE	Green	On steadily	TXP-F13 SIB is in active mode and actively passing traffic.
ACTIVE	–	Off	TXP-F13 SIB is either offline or not actively passing traffic.
OK	Green	On steadily	TXP-F13 SIB is functioning normally.
OK	–	Off	TXP-F13 SIB is offline or not seated properly.
FAIL	Yellow	On steadily	TXP-F13 SIB has failed.
FAIL	–	Off	No faults have been detected for the TXP-F13 SIB.

The port LEDs are located next to the ports. Table 2 describes the functions of these LEDs.

Table 2: F13-SIB Port LEDs

Label	Color	State	Description
LINK	Green	On steadily	The link between the TXP-F13 SIB port and the TXP-T1600 SIB port has been established successfully.
	Green	Blinking	The link between the TXP-F13 SIB port and the loopback connector has been established successfully.
	Yellow	On steadily	The link is being established.
	Yellow	Blinking	The fiber-optic array cable might be connected to either the wrong TXP-T1600 SIB port or wrong TXP-FI3 port.
	Red	On steadily	The link between the TXP-F13 SIB port and the TXP-T1600 SIB port failed. There might be a hardware problem, or the fiber-optic port or cable might need to be cleaned.
	–	Off	The cable is not connected on both sides, or either the TXP-F13 SIB or TXP-T1600 SIB is powered off.
RxPWR	Green	On steadily	Full optical power is being received.
	Green	On steadily	Full optical power is being received.
	Yellow	On steadily	Diminished optical power is being received. The fiber-optic array cable or the fiber-optic array port might need cleaning, or the cable might be damaged.
	–	Off	No optical power has been received. The fiber-optic array cable is not connected to the TXP-FI3 SIB port, or not connected to the TXP-T1600 SIB port. If the cable is connected on both sides, the cable might be cut.