Technical Documentation
New
Related Documentation
MX960 Switch Control Board LEDs
Three LEDs on the SCB indicate the status of the SCB. The LEDs, labeled FABRIC ACTIVE, FABRIC ONLY, and OK/FAIL, are located directly on the SCB. Table 1 describes the functions of the SCB LEDs.
Table 1: SCB LEDs
Label | Color | State | Description |
|---|---|---|---|
FABRIC ACTIVE | Green | On steadily | Fabric is in active mode. |
FABRIC ONLY | Green | On steadily | SCB operates in fabric-only mode. |
– | Off | SCB operates in fabric/control board mode. | |
OK/FAIL | Green | On steadily | SCB is online. |
Red | On steadily | SCB has failed. | |
– | Off | SCB is offline. |
Each SCB also has two LEDs on the craft interface that indicate its status. The SCB LEDs, labeled 0 and 1, are located along the bottom of the craft interface. For more information about the SCB LEDs on the craft interface, see MX960 SCB LEDs on the Craft Interface.
Related Documentation
Published: 2013-02-04
Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.
