Juniper Networks
Log in
|
How to Buy
|
Contact Us
|
United States (Change)
Choose Country
Close

Choose Country

North America

  • United States

Europe

  • Deutschland - Germany
  • España - Spain
  • France
  • Italia - Italy
  • Россия - Russia
  • United Kingdom

Asia Pacific

  • Asean Region (Vietnam, Indonesia, Singapore, Malaysia)
  • Australia
  • 中国 - China
  • India
  • 日本 - Japan
  • 대한민국 - Korea
  • 台灣 - Taiwan
Solutions
Products & Services
Company
Partners
Support
Education
Community
Security Intelligence Center

Technical Documentation

Download Software
Research a Problem Login required
Case Management Login required
Contract & Product Management Login required
Technical Documentation
Documentation Archive
Enterprise MIBs
File Format Help
Glossary
Portable Libraries
End-of-Life Products
Contact Support
Guidelines and Policies
Security Resources
Home > Support > Technical Documentation > T Series Routers > T640 Router Hardware > Gigabit Ethernet PICs with SFP (T640 Router)
Print
Rate and give feedback:  Feedback Received. Thank You!
Rate and give feedback: 
Close
This document helped resolve my issue.  Yes No

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:  
E-mail: 
Submitting...
 

Related Documentation

  • T Series
  • T640 PIC Description
  • High Availability Features
  • T640 PIC Combination Limitations
  • T640 PICs Supported
 

Gigabit Ethernet PICs with SFP (T640 Router)

Figure 1: 1-Port Gigabit Ethernet PIC

Image g001891.gif

Figure 2: 2-Port Gigabit Ethernet PIC

Image g002116.gif

Figure 3: 4-Port Gigabit Ethernet PIC

Image g002125.gif

Figure 4: 10-Port Gigabit Ethernet PIC

Image g001852.gif

Software release

  • 1-port: Junos OS Release 8.0 and later (Type 1)
  • 2-port: Junos OS Release 6.4 and later (Type 2)
  • 4-port: Junos OS Release 7.0 and later (Type 2)
  • 10-port: Junos OS Release 5.5 and later (Type 3)

For information on which FPCs support these PICs, seeT640 PIC/FPC Compatibility .

Description

  • One, two, four, or ten Gigabit Ethernet ports
  • Power requirement:
    • 1-port: 0.25 A @ 48 V (11.9 W)
    • 2-port: 0.25 A @ 48 V (11.9 W)
    • 4-port: 0.50 A @ 48 V (23.8 W)
    • 10-port: 0.62 A @ 48 V (29.9 W)
  • Supports large Ethernet frame sizes for more efficient throughput across the intra-POP network

Hardware features

  • High-performance throughput on each port at speeds up to 1 Gbps
  • Autonegotiation between Gigabit Ethernet circuit partners
  • Full-duplex mode
  • Maximum transmission units (MTUs) of up to 9192 bytes

Software features

  • Virtual Router Redundancy Protocol (VRRP) support
  • 802.1q virtual LANs (VLANs) support
  • 960 destination MAC filters per port
  • Optical diagnostics and related alarms on the 2-port, 4-port, and 10-port PICs (Junos OS Release 8.2 and later)
  • 64 source MAC filters per VLAN on the 1-port, 2-port, and 4-port PICs
  • 1024 source MAC filters per port on the 1-port, 2-port, and 4-port PICs
  • Flexible Ethernet encapsulation on the 1-port, 2-port, and 4-port PICs
  • Multiple tag protocol identifiers (TPID) support on the 1-port, 2-port, and 4-port PICs
  • Source MAC learning on the 1-port, 2-port, and 4-port PICs
  • MAC accounting and policing—Dynamic local address learning of source MAC addresses on the 1-port, 2-port, and 4-port PICs
  • Passive monitoring for IPv4 packets on the 10-port PIC for Junos OS Release 11.1 and later.

Note: The 10-port Gigabit Ethernet PIC with SFP does not support MAC accounting and policing, MAC learning, TPID, or flexible Ethernet encapsulation. 64 source MAC filters per port.

Cables and connectors

  • You can install any transceiver supported by the PIC.
  • Fiber-optic SFP transceivers:
    • Duplex LC/PC connector (Rx and Tx)
    • 1000Base-LH (model number: SFP-1GE-LH)
    • 1000Base-LX (model number: SFP-1GE-LX)
    • 1000Base-SX (model number: SFP-1GE-SX)
    • Optical interface specifications—see Gigabit Ethernet 1000BASE Optical Interface Specifications
    • 1000Base-BX (model number pairs: SFP-GE10KT13R14 with SFP-GE10KT14R13, SFP-GE10KT13R15 with SFP-GE10KT15R13, SFP-GE40KT13R15 with SFP-GE40KT15R13)—see Fast Ethernet and Gigabit Ethernet Bidirectional SFP Optical Interface Specifications
  • Copper transceivers:
    • Connector: Four-pair, Category 5 shielded twisted-pair connectivity through an RJ-45 connector
    • 1000Base-T (model number: SFP-1-GE-T)
    • Copper interface specifications—see Gigabit Ethernet 1000BASE-T Copper Interface Specifications

Note: Do not install Gigabit Ethernet SFPs in the SONET/SDH port. The port will not recognize the SFP.

LEDs

Status LED, one bicolor:

  • Off—PIC is not enabled.
  • Green—PIC is operating normally.
  • Red—PIC has an error or failure.

Port LEDs, one pair per port:

  • Link—If green, the port is online; if there is no light, the port is down.
  • Activity—If flashing green, the port is receiving data; if there is no light, the port might be on but is not receiving data.
 

Related Documentation

  • T Series
  • T640 PIC Description
  • High Availability Features
  • T640 PIC Combination Limitations
  • T640 PICs Supported
 

Published: 2011-03-01

 
  • About Juniper
  • The New Network
  • Investor Relations
  • Press Releases
  • Newsletters
  • Juniper Offices
  • Resources
  • How to Buy
  • Partner Locator
  • Image Library
  • Visio Templates
  • Security Center
  • Community
  • Forums
  • Blogs
  • Junos Central
  • Social Media
  • Support
  • Technical Documentation
  • Knowledge Base (KB)
  • Software Downloads
  • Product Licensing
  • Contact Support
Site Map / RSS Feeds / Careers / Accessibility / Feedback / Privacy & Policy / Legal Notices
Copyright© 1999-2012 Juniper Networks, Inc. All rights reserved.
Help
|
My Account
|
Log Out