Rate and give feedback:
Feedback Received. Thank You!
Link Services PIC (T1600 Router)
Software release | - Junos OS Release 6.0 and later
|
Description | - Power requirement: 0.17 A @ 48 V (8 W)
- Three versions:
- 4 multilink bundles, 256 LFI links
- 32 multilink bundles, 256 LFI links
- 128 multilink bundles, 256 LFI links
- Multilink bonding, link fragmentation and interleaving
(LFI), and tunneling
|
Hardware features | - Rate limiting/policing per multilink bundle
- Byte-wise load balancing across multilink bundles
- Bonding T1 links enable service ranging from 1.5 Mbps
through 12 Mbps
- Bonding E1 links enable service ranging from 2 Mbps through
16 Mbps
- Loopback function that encapsulates and de-encapsulates
packets
|
Software features | For a list of the software features available
for services PICs, see the Junos OS Services Interfaces Configuration Guide. - Protocol support:
- Multilink PPP (MLPPP)
- Multilink Frame Relay (MLFR)—FRF.15 and FRF.16
- Link fragmentation and interleaving (LFI)—FRF.12
- LFI over MLPPP
- IP-IP unicast tunneling
- GRE unicast tunneling
- PIM sparse mode unicast tunneling
|
LEDs | One bicolor: - Off—PIC is offline
- Green—PIC is online and at least one configured
bundle is operating
- Yellow—PIC is online, but no configured bundles
are operating
|
Published: 2010-10-22
Copyright© 1999-2012 Juniper Networks, Inc. All rights reserved.
