Adaptive Services II Layer 2 Services PIC (M40e Router)

Description
|
- Supports Layer 2 Service package only. Tunnel services
are included with the PIC. Other services require an individual license.
- Power requirement: 0.4 A @ 48 V (19 W)
|
Hardware features
|
- Support for up to 2000 service sets
- Support for MTUs up to 9192 bytes for Gigabit Ethernet
and SONET interfaces
|
Software features
|
Depending on your JUNOS release and individual
licenses, software features for this PIC can include the features
listed in Table 1. For more
information about the software features available for services PICs,
see the JUNOS Services Interfaces
Configuration Guide.
|
LEDs
|
Status LED, one tricolor:
- Off—PIC is offline and it is safe to remove it from
the chassis.
- Green—PIC is operating normally.
- Yellow—PIC is initializing.
- Red—PIC has an error or failure and no further harm
can be done by removing it from the chassis.
Application LED, one bicolor:
- Off—Service is not running.
- Green—Service is running under acceptable load.
- Yellow—Service is overloaded.
|
Table 1: Adaptive Services PICs Software Features
Software Feature
|
Adaptive Services II PIC
|
Adaptive Services II Layer 2 Services PIC
|
GRE Key
|
7.1
|
–
|
GRE dont-fragment
|
7.0
|
–
|
Stateful firewall with packet inspection: detects SYN
attacks, ICMP and UDP floods, and ping-of-death attacks
|
6.4
|
–
|
Network Address Translation (NAT) for IP addresses
|
6.4
|
–
|
Port Address Translation (PAT) for port numbers
|
6.4
|
–
|
IP Security (IPSec) encryption
|
6.4
|
–
|
Active flow monitoring exports cflowd version 5 and version
8 records
|
7.0
|
–
|
Active flow monitoring exports version 9 records, based
on RFC 3954 (IP v4 templates only)
|
8.3
|
–
|
Passive flow monitoring
|
–
|
–
|
Passive flow collection
|
–
|
–
|
Flow-tap
|
8.1
|
–
|
Dynamic flow capture
|
–
|
–
|
Real-time performance monitoring
|
8.1
|
–
|
Link services
|
7.1
|
7.5
|
Tunnel services:
- IP-IP unicast tunneling
- GRE unicast tunneling—Supports GRE fragmentation
- Protocol Independent Multicast (PIM) sparse mode unicast
tunneling
|
6.4
|
7.5
|
Virtual tunnel interface for Layer 3 VPNs
|
6.4
|
–
|
Layer 2 Tunneling Protocol (L2TP)
|
–
|
–
|
Voice services:
- Compressed Real-Time Transport Protocol (CRTP)
|
7.2
|
7.5
|
Encapsulations:
- Multilink Frame Relay (MLFR)
- Multilink Point-to-Point Protocol (MLPP)
|
7.1
|
–
|
Published: 2009-10-02