Rate and give feedback:
Feedback Received. Thank You!
Tunnel Services PIC (M320 Router)
Software release | - Junos OS Release 6.2 and later (Type 1 and Type 2)
- Junos OS Release 6.3 and later (Type 3)
For information on which FPCs support this PIC, see M320 PIC/FPC Compatibility. |
Description | - Power requirement: 0.07 A @ 48 V (3.4 W)
|
Hardware features | - Loopback function that encapsulates and de-encapsulates
packets
- OC12/STM4 tunneling bandwidth on FPC1; OC48/STM16 tunneling
bandwidth on FPC2; OC192/STM64 tunneling bandwidth on FPC3
|
Software features | For a list of the software features available
for services PICs, see the Junos OS Services Interfaces Configuration Guide  . - IP-IP unicast tunneling
- GRE unicast tunneling
- PIM sparse mode unicast tunneling
|
LEDs | One tricolor: - Off—Not enabled
- Green—Online with no alarms or failures
- Yellow—Online with alarms for remote failures
- Red—Active with a local alarm; router has detected
a failure
|
Published: 2012-03-21
Copyright© 1999-2012 Juniper Networks, Inc. All rights reserved.
