Rate and give feedback:
Feedback Received. Thank You!
Channelized DS3/E3 Enhanced IQ (IQE) PIC (M320 Router)
Description | - Four E3 or Channelized DS3 ports
- E3 or Channelized DS3 is configurable on a per-port granularity
- DS3 channelization:
- 4 DS3 channels
- 112 DS1 channels
- 1011 DS0 channels
- Power requirement: 0.53 A @ 48 V (25.4 W)
|
Hardware features | - Ports are numbered 0 through 3 top to bottom
|
Software features | |
Cables and connectors | - Standard DS3 BNC coaxial cable interfaces
|
LEDs | One tricolor per port: - Off—Not enabled
- Green—Online with no alarms or failures
- Yellow—Online with alarms for remote failures
- Red—Active with a local alarm; router has detected
a failure
|
Alarms, errors, and events | - Alarm reporting for error statistics and failure counts
- Alarm indication signal (AIS)
- Loss of frame (LOF)
- Remote alarm indication signal (RAIS)
- Bursty errored seconds (BES)
- CRC errors
- Errored seconds (ES)
- Line errored seconds (LES)
- Loss of framing seconds (LOFS)
- Loss of signal seconds (LOS)
- Severely errored seconds (SES)
- Severely errored framing seconds (SEFS)
- Unavailable seconds (UAS)
- Alarm indication signal (AIS)
- Loss of frame (LOF)
- Loss of signal (LOS)
- Phase lock loop (PLL)
- Yellow alarm
- C-bit code violations (CCV)
- C-bit errored seconds (CES)
- C-bit severely errored framing seconds (CEFS)
- CRC errors
- Excessive zeros (EXZ)
- Far-end block error (FEBE)
- Far-end receive failure (FERF)
- Line errored seconds (LES)
- Parity bit (P-bit) code violations (PCV)
- Parity bit (P-bit) errored seconds (PES)
- Parity bit (P-bit) severely errored framing seconds (PSES)
- Severely errored framing seconds (SEFS)
- Unavailable seconds (UAS)
|
Instrumentation (counters) | - Layer 2 per-queue and per-channel packet and byte counters
|
Published: 2012-03-21
Copyright© 1999-2012 Juniper Networks, Inc. All rights reserved.
for more information about class of service
features.