Rate and give feedback:
Feedback Received. Thank You!
Multiservices DPC
Software release | - Junos OS Release 9.3 and later
|
Description | - Power requirement: 5.52 A @ 48 V (265 W)
- Weight: 14.7 lb (6.7 kg)
- Supports tunnel services. This feature is included with
the DPC and does not require an individual license.
- Individual licenses must be purchased for additional services.
- Supports large Ethernet frame sizes for more efficient
throughput across the intra-POP network
- The maximum number of supported MS-DPCs is as follows
except where noted in Protocols and Applications Supported by the Multiservices DPC (MS-DPC):
- MX240 router: 2
- MX480 router: 4
- MX960 router: 6
- Model number: MS-DPC
|
Hardware features | - Active monitoring on up to 10 million flows
- Maximum transmission units (MTUs) of up to 9192 bytes
- Two Multiservices Processing Units (MSPUs) per DPC, which
include two 1.1Ghz multicore CPUs, each with 4GB of memory for processing
integrated services
|
Software features | |
Cables and connectors | |
LEDs | OK/FAIL LED, one bicolor: - Steady green—DPC is functioning normally.
- Blinking green—DPC is transitioning online or offline.
- Red—DPC has failed.
STATUS LED, one tricolor per MSPU: - Off—MSPU is offline. If both MSPUs are offline it
is safe to remove the DPC from the chassis.
- Green—MSPU is operating normally.
- Yellow—MSPU is initializing.
- Red—MSPU has an error or failure.
Application (APP) LED, one tricolor per MSPU: - Off—Service is not running on the MSPU.
- Green—Service is running on the MSPU under acceptable
load.
- Yellow—Service on the MSPU is overloaded.
|
Published: 2013-03-21
Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.
New
