Technical Documentation

Download Software

Research a Problem

Case Management

Contract & Product Management

Technical Documentation

Documentation Archive

Enterprise MIBs

File Format Help

Portable Libraries

End-of-Life Products

Contact Support

Guidelines and Policies

Security Resources

Related Documentation

Multi-Rate Ethernet Enhanced Ethernet Services DPC with SFP and XFP

Software release	Junos OS Release 9.2 and later
Description	20 Gigabit Ethernet ports 2 10-Gigabit Ethernet ports Power requirement: 6.94 A @ 48 V (333 W) Weight: 13.1 lb (5.9 kg) Supports large Ethernet frame sizes for more efficient throughput across the intra-POP network Model number: DPCE-X-20GE-2XGE
Hardware features	SFP ports: High-performance throughput on each port at speeds up to 1 Gbps XFP ports: High-performance throughput on each port at speeds up to 10 Gbps WAN-PHY mode at 9.953 Gbps LAN-PHY mode at 10.3125 Gbps Full-duplex mode Maximum transmission units (MTUs) of up to 9192 bytes Enhanced ASICs for increased performance and scalability of Layer 2 features
Software features	Configurable WAN-PHY mode options Optical diagnostics and related alarms See Protocols and Applications Supported by Enhanced Ethernet Services DPCs (DPCE-X) for information about the protocols and applications that this DPC supports.
Cables and connectors	You can install any transceiver supported by the DPC. For information about installing and removing transceivers, see the hardware guide for your router. Fiber-optic small form-factor pluggable (SFP) transceivers: Connector: Duplex LC/PC (Rx and Tx) 100BASE-FX (model number: SFP-1FE-FX) supported in Junos OS Release 9.3 and later 1000BASE-EX (model number: SFP-GE40KM) 1000BASE-LH (model number: SFP-1GE-LH) 1000BASE-LX (model number: SFP-1GE-LX) 1000BASE-SX (model number: SFP-1GE-SX) Optical interface specifications—see Gigabit Ethernet 1000BASE Optical Interface Specifications Copper SFP transceivers: Connector: Four-pair, Category 5 shielded twisted-pair connectivity through an RJ-45 connector 10/100/1000BASE-T (model numbers: SFP-1GE-T and SFP-1GE-FE-E-T) Note: SFP-1GE-FE-E-T supports tri-rate 10/100/1000 mode in Junos OS Release 9.4 and later Pinout: MDI, MDI crossover Length: 328 ft/100 m Copper interface specifications—see Ethernet 10BASE-T Copper Interface Specifications, Fast Ethernet 100BASE-T Copper Interface Specifications, and Gigabit Ethernet 1000BASE-T Copper Interface Specifications Bidirectional SFP transceivers: Connector: Duplex LC/PC (Rx and Tx) 100BASE-BX (model number pairs: EX-SFP-FE20KT13R15 with EX-SFP-FE20KT15R13) 1000BASE-BX (model number pairs: SFP-GE10KT13R14 with SFP-GE10KT14R13, SFP-GE10KT13R15 with SFP-GE10KT15R13, SFP-GE40KT13R15 with SFP-GE40KT15R13) Optical interface specifications—see Fast Ethernet and Gigabit Ethernet Bidirectional SFP Optical Interface Specifications Fiber-optic 10-gigabit small form-factor pluggable (XFP) transceivers: Connector: Duplex LC/PC (Rx and Tx) 10GBASE-E (model number: XFP-10G-E-OC192-IR2) 10GBASE-L (model number: XFP-10G-L-OC192-SR1) 10GBASE-S (model number: XFP-10G-S) 10GBASE-Z (model number: XFP-10G-Z-OC192-LR2) Optical interface specifications—see 10-Gigabit Ethernet 10GBASE Optical Interface Specifications DWDM Tunable XFP transceivers: Connector: Duplex LC/PC (Rx and Tx) 10GBASE-ZR (model number: XFP-10G-CBAND-T50-ZR) DWDM supported wavelengths—see 10-Gigabit Ethernet DWDM Transceiver Wavelengths Note: XFP-10G-CBAND-T50-ZR is supported in Junos OS Release 10.2 and later Optical interface specifications—see 10-Gigabit Ethernet 10GBASE Optical Interface Specifications
LEDs	OK/FAIL LED, one bicolor: Steady green—DPC is functioning normally. Blinking green—DPC is transitioning online or offline. Red—DPC has failed. LINK LED, one green per port: Off—No link. On steadily—Link is active. TUNNEL LED, one green per XFP port: Off—Normal operating mode. On steadily—Port configured in tunnel mode. The SFP Link LEDs are labeled in groups of five: 0/0 for 0/0 through 0/4 0/5 for 0/5 through 0/9 1/0 for 1/0 through 1/4 1/5 for 1/5 through 1/9 The XFP ports are labeled top to bottom 2/0 and 3/0.

Related Documentation

Published: 2011-12-21

Site Map / RSS Feeds / Careers / Accessibility / Feedback / Privacy & Policy / Legal Notices

Copyright© 1999-2012 Juniper Networks, Inc. All rights reserved.

|

|