Technical Documentation
TX Matrix Plus TXP-CB LEDs
The LEDs located on the bottom of the TXP-CB indicate its status. Table 1 describes the functions of the TXP-CB LEDs.
Figure 1: TXP-CB
Table 1: TXP-CB LEDs
Label | Color | State | Description |
|---|---|---|---|
MASTER | Blue | On steadily | TXP-CB is functioning as the master. |
– | Off | TXP-CB is functioning as the backup. | |
FAIL | Yellow | On steadily | TXP-CB has failed. |
– | Off | No faults have been detected on the TXP-CB. | |
OK | Green | On steadily | TXP-CB is online and is functioning normally. |
Blinking | TXP-CB is powering up, but not online. | ||
– | Off | TXP-CB is offline. | |
ETHERNET | Green | On steadily | 1-Gbps connection |
Yellow | On steadily | 10/100-Mbps connection | |
– | Off | TXP-CB is offline. | |
ACT | Green | On steadily | Traffic is passing through the port. |
– | Off | No traffic is passing through the port. |
Published: 2011-12-19
Copyright© 1999-2012 Juniper Networks, Inc. All rights reserved.
