Technical Documentation
Related Documentation
TX Matrix Plus TXP-CIP LEDs
Three LEDs—ACTIVE, OK, FAIL—indicate the status of the TXP-CIP (Table 1).
Table 1: TXP-CIP LEDs
Label | Color | State | Description |
|---|---|---|---|
ACTIVE | Green | On steadily | TXP-CIP is in active mode and actively passing traffic to a T1600 router. |
– | Off | TXP-CIP is not actively passing traffic to a T1600 router. | |
OK | Green | On steadily | TXP-CIP is functioning normally. |
– | Off | TXP-CIP is offline, or is not seated properly, or is not receiving power from the power supply. | |
FAIL | Yellow | On steadily | TXP-CIP has failed. |
– | Off | No faults have been detected for the TXP-CIP. |
Each control plane port on the TXP-CIP has two LEDs that indicate the status of the link. Other ports are reserved for future use.
Table 2: TXP-CIP Port LEDs
Port | Label | Color | State | Description |
|---|---|---|---|---|
LCC CTRL PLANE ports 0 through 15 Reserved ports 16 and 17 | ACT | Green | Blinking | Traffic is present. There is activity on the port. |
– | Off | There is no activity on the port. | ||
SPEED | Green | On steadily | High-speed link (1G) | |
Yellow | On steadily | Low-speed link (10/100M) | ||
– | Off | The TXP-CIP is not powered on or the port is not connected. | ||
SFC CTRL PLANE ports XGE0 through XGE4 | ACT | – | – | Note: These ports are reserved for future use. |
LINK |
