Operating and Positioning the MX960 SCB Ejectors

• When removing or inserting an SCB, ensure that the SCBs or blank panels in adjacent slots are fully inserted to avoid hitting them with the ejector handles. The ejector handles require that all adjacent components be completely inserted so the ejector handles do not hit them, which could result in damage.
• The ejector handles have a center of rotation and need to be stored toward the center of the board. Ensure that the long ends of the ejectors are located at both the top and the bottom of the board, are vertically. For an ejector located at the top of the board, press the ejector down toward the center of the board. For an ejector located on the bottom of the board, press the ejector up toward the center of the board.
• To insert or remove the SCB, slide the ejector across the SCB horizontally, rotate it, and slide it again another quarter of a turn. Turn the ejector again and repeat as necessary. Use the indexing feature to maximize leverage and to avoid hitting any adjacent components.
• Operate both ejector handles simultaneously. The insertion force on an SCB is too great for one ejector.