Technical Documentation
Related Documentation
- SRX5800 Services Gateway Craft Interface Power Supply LEDs
- SRX5800 Services Gateway Power System Overview
- SRX5800 Services Gateway Standard-Capacity AC Power Supply LEDs
- Troubleshooting the SRX5800 Services Gateway Power System
- Replacing an SRX5800 Services Gateway AC Power Supply
- SRX5800 Services Gateway AC Power Supply Specifications
SRX5800 Services Gateway Standard-capacity AC Power Supply
Each standard-capacity AC power supply has a corresponding AC appliance inlet located in the chassis directly above the power supply. Each inlet requires a dedicated AC power feed and a dedicated 15 A (250 VAC) circuit breaker.
 | Warning: The services gateway is pluggable type A equipment installed in a restricted-access location. It has a separate protective earthing terminal (the left pair is sized for M6 bolts, and the right pair is sized for UNC 1/4-20 ground lugs) provided on the chassis in addition to the grounding pin of the power supply cord. This separate protective earth terminal must be permanently connected to earth. |
Figure 1: Standard-Capacity AC Power Supply
Related Documentation
- SRX5800 Services Gateway Craft Interface Power Supply LEDs
- SRX5800 Services Gateway Power System Overview
- SRX5800 Services Gateway Standard-Capacity AC Power Supply LEDs
- Troubleshooting the SRX5800 Services Gateway Power System
- Replacing an SRX5800 Services Gateway AC Power Supply
- SRX5800 Services Gateway AC Power Supply Specifications
Published: 2011-03-29
Copyright© 1999-2012 Juniper Networks, Inc. All rights reserved.
