Technical Documentation
Related Documentation
- SRX5600 Services Gateway Power System Overview
- SRX5600 Services Gateway AC Power Configurations
- SRX5600 Services Gateway AC Power Supply LEDs
- Troubleshooting the SRX5600 Services Gateway Power System
- Replacing an SRX5600 Services Gateway AC Power Supply
- SRX5600 Services Gateway AC Power Supply Specifications
SRX5600 Services Gateway AC Power Supply
Each AC power supply weighs approximately 5.0 lb (2.3 kg) and consists of one AC appliance inlet, an AC switch, a fan, and LEDs to monitor the status of the power supply. Figure 1 shows the power supply. Each inlet requires a dedicated AC power feed and a dedicated 15 A (250 VAC)circuit breaker.
Figure 1: AC Power Supply
 | Warning: The services gateway is pluggable type A equipment installed in a restricted-access location. It has a separate protective earthing terminal (sized for UNC 1/4-20 ground lugs) provided on the chassis in addition to the grounding pin of the power supply cord. This separate protective earthing terminal must be permanently connected to earth. |
Related Documentation
- SRX5600 Services Gateway Power System Overview
- SRX5600 Services Gateway AC Power Configurations
- SRX5600 Services Gateway AC Power Supply LEDs
- Troubleshooting the SRX5600 Services Gateway Power System
- Replacing an SRX5600 Services Gateway AC Power Supply
- SRX5600 Services Gateway AC Power Supply Specifications
Published: 2011-03-29
Copyright© 1999-2012 Juniper Networks, Inc. All rights reserved.
