Technical Documentation
Related Documentation
- JCS 1200
- General Electrical Safety Guidelines and Electrical Codes for M Series, MX Series, and T Series Routers
- M Series
- General Electrical Safety Guidelines and Electrical Codes for M Series, MX Series, and T Series Routers
- MX Series
- General Electrical Safety Guidelines and Electrical Codes for M Series, MX Series, and T Series Routers
- MX960 DC Power Supply
- Connecting Power to a DC-Powered MX960 Router with Normal-Capacity Power Supplies
- Replacing an MX960 DC Power Supply Cable
- Connecting an MX960 DC Power Supply Cable
- DC Power Cable Specifications for the MX960 Router
- T Series
- General Electrical Safety Guidelines and Electrical Codes for M Series, MX Series, and T Series Routers
DC Power Source Cabling for the MX960 Router
Figure 1 shows a typical DC source cabling arrangement.
Figure 1: Typical DC Source Cabling to the Router
The DC power supplies in slots PEM0 and PEM1 must be powered by dedicated power feeds derived from feed A, and the DC power supplies in slots PEM2 and PEM3 must be powered by dedicated power feeds derived from feed B. This configuration provides the commonly deployed A/B feed redundancy for the system.
 | Caution: You must ensure that power connections maintain the proper polarity. The power source cables might be labeled (+) and (–) to indicate their polarity. There is no standard color coding for DC power cables. The color coding used by the external DC power source at your site determines the color coding for the leads on the power cables that attach to the terminal studs on each power supply. |
 | Warning: For field-wiring connections, use copper conductors only. |
| Caution: Power cords and cables must not block access to device components or drape where people could trip on them. |
Related Documentation
- JCS 1200
- General Electrical Safety Guidelines and Electrical Codes for M Series, MX Series, and T Series Routers
- M Series
- General Electrical Safety Guidelines and Electrical Codes for M Series, MX Series, and T Series Routers
- MX Series
- General Electrical Safety Guidelines and Electrical Codes for M Series, MX Series, and T Series Routers
- MX960 DC Power Supply
- Connecting Power to a DC-Powered MX960 Router with Normal-Capacity Power Supplies
- Replacing an MX960 DC Power Supply Cable
- Connecting an MX960 DC Power Supply Cable
- DC Power Cable Specifications for the MX960 Router
- T Series
- General Electrical Safety Guidelines and Electrical Codes for M Series, MX Series, and T Series Routers
