JCS1200 Hardware Overview

• Hot-swap capability, which allows you to add, remove, or replace Routing Engines, media trays, management modules, switch modules, alarm panel modules, MUX cards, power modules, and fans without removing power from the JCS1200 platform.
• A midplane that connects all JCS1200 components.
• A management module that functions as a systems management processor. There are two management module bays.
• Power modules that provide redundant power for all JCS1200 components. There are four power modules that operate in redundant pairs. Each pair provides power to selected JCS1200 components.
• Fans that provide cooling for most JCS1200 components. There are three fans connected to each power module on the front of the JCS1200 platform and four hot-swappable fan modules on the rear of the JCS1200 platform.
• Two copper or optical switch modules that support external network interface connections to network resources and control boards of T Series routers.
• Four high-speed switch module bays that support high-speed external network interface connections to network resources and other devices.

  Note: The high-speed switch module bays are not currently supported on the JCS1200 platform.

• A media tray that contains two universal serial bus (USB) version 2.0 ports that can be used by any Routing Engine. There are two media tray bays.

Figure 1 shows a straight-on front view of a JCS1200 AC platform.

Figure 1: Straight-On Front View of the JCS1200 Platform

Figure 2 shows a straight-on rear view of a JCS1200 AC platform with AC power connectors.

Figure 2: Straight-On Rear View of the JCS1200 Platform with AC Connectors