- Download
Software
- Research a
Problem - Case Management
- Communities and Forums
- Contract & Product Management
- Technical Documentation Advanced Search
- Documentation Feedback Form
- Documentation Symbols Key
- End-of-Life Products
- Guidelines and Policies
- Security Resources
Juniper was the first North American IP routing vendor to achieve the prestigious TL 9000 certification by the Quality of Excellence for Suppliers of Telecommunications (QuEST) Forum in the router category, for design, development, provision and service and support.
What is J-Care?
It's the world-class service and support that you expect from a company that delivers the industry's best infrastructure and security products. With J-Care, you now have the confidence knowing that Juniper will do our part to keep you on top of the world!
JCS1200 Fan Module Description
The JCS1200 platform comes with four hot-swappable fan modules for cooling redundancy. The fan module speeds vary depending on the ambient air temperature within the JCS1200 platform, which is reported by the media tray. If the ambient temperature is 77° F (25° C) or below, the JCS1200 platform fan modules run at their minimum rotational speed. If the ambient temperature is above 77° F (25° C), the fan modules run faster, increasing their speed as required to control internal JCS1200 platform temperature. Each fan module contains two fans operating as a pair in a series. If one fan fails, the remaining fan runs at full speed and continues to cool the JCS1200 platform. Replace a failed fan module as soon as possible to restore cooling redundancy.
 |
Note: While the JCS1200 is operating, remove only one fan module at a time. Removing two fan modules might cause the JCS1200 platform to overheat. If you remove two fan modules while the JCS1200 platform is operating, the management module powers off all Routing Engines. |
