Technical Documentation
SRX5600 Services Gateway Craft Interface Host Subsystem LEDs
The host subsystem has three LEDs, located on the upper left of the craft interface, that indicate its status. The LEDs labeled RE0 show the status of the Routing Engine and SCB in slot 0 . The LEDs labeled RE1 show the status of the Routing Engine and SCB in slot 1. Table 1 describes the functions of the host subsystem LEDs.
Table 1: Host Subsystem LEDs
Label | Color | State | Description |
|---|---|---|---|
MASTER | Green | On steadily | Host is functioning as the master. |
ONLINE | Green | On steadily | Host is online and is functioning normally. |
OFFLINE | Red | On steadily | Host is installed but the Routing Engine is offline. |
Off | Host is not installed. |
Published: 2011-03-29
Copyright© 1999-2012 Juniper Networks, Inc. All rights reserved.
