Technical Documentation
Related Documentation
- T Series
- Routing Matrix with a TX Matrix Plus Router System Control Plane Architecture
- Control Plane Connections from the TX Matrix Plus Router to the T1600 Routers
- Upgrading an Offline T1600 Router Before Integrating It into a Routing Matrix
- Registering Your T1600 Upgrade
- Overview of Integrating an Offline T1600 Router into a Routing Matrix
- Connecting an Offline T1600 Router to the TX Matrix Plus Router
LCC-CBs
An LCC-CB on the T1600 router works with an adjacent Routing Engine to provide control and monitoring functions for the router (see Figure 1). These functions include determining Routing Engine mastership, controlling power and reset for the other T1600 router components, monitoring and controlling fan speed, and monitoring system status. Each T1600 router contains up to two LCC-CBs at the upper front of the chassis.
 | Note: We recommend that you install two host subsystems for redundant protection. |
Figure 1: LCC-CB on the T1600 Router
Related Documentation
- T Series
- Routing Matrix with a TX Matrix Plus Router System Control Plane Architecture
- Control Plane Connections from the TX Matrix Plus Router to the T1600 Routers
- Upgrading an Offline T1600 Router Before Integrating It into a Routing Matrix
- Registering Your T1600 Upgrade
- Overview of Integrating an Offline T1600 Router into a Routing Matrix
- Connecting an Offline T1600 Router to the TX Matrix Plus Router
Published: 2011-12-19
Copyright© 1999-2012 Juniper Networks, Inc. All rights reserved.
