Technical Documentation
Hardware Component Locations in the SRX3600 Services Gateway Chassis
The SRX3600 Services Gateway is populated with one SFB, one Routing Engine, two power supplies, and a fan tray at the factory. You must install all other cards required to meet your configuration needs. Table 1 lists the possible locations of the various hardware components in the SRX3600 Services Gateway. Figure 1 and Figure 2 show the locations of the slots and the applicable modules.
Table 1: Allowed Slot Locations for the SRX3600 Services Gateway Components
Module Name | Allowed Slot Locations |
|---|---|
SFB | Front slot labeled 0. |
Routing Engine | Rear slot labeled RE0. |
SCM | Rear slot labeled RE1. |
IOC | Front slots labeled 1-6. |
NPC | Rear slots labeled 10-12. |
SPC | Front slots labeled 1-6 and rear slots labeled 7-12. We recommend that you install SPCs in rear panel slots to leave room for IOCs in the front panel slots. |
Power supplies | Rear slots (four) at top of chassis. |
Fan tray and air filter | Rear, vertical slot on far right of chassis. |
Figure 1: Front Slots on the SRX3600 Services Gateway
Figure 2: Rear Slots on the SRX3600 Services Gateway
 | Note: A minimum configuration must include one Network Processing Card (NPC) and one Services Processing Card (SPC). SeeSRX3600 Services Gateway Network Processing Cards andSRX3600 Services Gateway Services Processing Cards for details about these cards. |
