Software release

• JUNOS 6.2 and later (Type 3): 10GBase-ER and 10GBase-ZR transceivers
• JUNOS 7.1 and later (Type 3): 10GBase-SR and 10GBase-ZR transceivers

Description

• One 10-Gigabit Ethernet port
• Power requirement: 0.55 A @ 48 V (26.6 W)
• Supports large Ethernet frame sizes for more efficient throughput across the intra-POP network
• Optical interface support—See Table 27

Hardware features

• High-performance throughput at speeds up to 10 Gbps
• Full-duplex mode
• Maximum transmission units (MTUs) up to 9192 bytes
• 64 source MAC address filters
• 960 destination MAC filters

Software features

• Virtual Router Redundancy Protocol (VRRP) support
• 802.1q virtual LANs (VLANs) support
• 802.3ae link aggregation support
• RMON EtherStats
• Optical diagnostics and related alarms (JUNOS Release 8.1 and later):
  • Transceiver temperature
  • Laser bias current
  • Laser output power
  • Receive optical power

Cables and connectors

• Duplex SC/PC connector (RX and TX)

• Optical interface support—See Table 27

LEDs

Status LED, one bicolor:

• Off—PIC not enabled.
• Green—PIC is operating normally.
• Red—PIC has an error or failure.

Port LEDs, one pair:

• Link—If green, the port is online; if there is no light, the port is down.
• RX—If flashing green, the port is receiving data; if there is no light, the port might be on but is not receiving data.