Description
|
- One 10-Gigabit Optical Transport Network (OTN) port for
transport of 10-Gigabit Ethernet (10GBASE-R) traffic
- Power requirement: 0.55 A @ 48 V (26.6 W)
- Supports large Ethernet frame sizes for more efficient
throughput across the intra-POP network
|
Hardware features
|
- C-band ITU-Grid with 50 GHz spacing
- High-performance throughput at speeds up to 10 Gbps
- Full-duplex mode
- Maximum transmission units (MTUs) up to 9192 bytes
- 64 source MAC address filters
- 960 destination MAC filters
- 89 individual wavelengths—see Table 31 for wavelengths in terahertz (THz)
and nanometers (nm).
|
Software features
|
- Enhanced optical monitoring capabilities
- CLI configurable wavelength support
- Virtual Router Redundancy Protocol (VRRP) support
- 802.1q virtual LANs (VLANs) support
- 802.3ae link aggregation support
- RMON EtherStats
|
Cables and connectors
|
- Duplex SC/PC connector (RX and TX)
- Optical interface support—see Table 30.
|
LEDs
|
Status LED, one bicolor:
- Off—PIC is not enabled.
- Green—PIC is operating normally.
- Red—PIC has an error or is in line-side loopback.
|
