Software release

• JUNOS 7.4 and later (Type 2)

Note: The Monitoring Services III PIC is not supported by T640 routing nodes connected to a TX Matrix platform.

Description

• Power requirement: 0.4 A @ 48 V (19 W)
• Supports dynamic flow capture
• 2 Gbps of sustained packet bandwidth

Hardware features

• Supports MTUs up to 4474 bytes for SONET interfaces

Software features

For more information about the software features for services PICs, see the JUNOS Services Interfaces Configuration Guide.

• Dynamic flow capture

Cables and connectors

• None

LEDs

Two Status LEDs: PIC and APP

PIC LED, one tricolor:

• Off—PIC is offline and it is safe to remove it from the chassis.
• Green—PIC is operating normally.
• Amber—PIC is initializing.
• Red—PIC has an error or failure and no further harm can be done by removing it from the chassis.

Application LED, one tricolor:

• Off—Monitoring application is not running.
• Green—Monitoring application is running under acceptable load.
• Amber—Monitoring application is overloaded.
• Red—Not used.