- Related Topics
- Wireless Settings in a Security Device Overview
- Network, Interface, and Security Modules Supported in Security Devices
- Chassis Information Overview
- WPA2, Extended Range, and Super G Support on NetScreen5GT Wireless Overview
- Wi-Fi Protected Access Overview
- Conducting a Site Survey for Detecting Access Points
Configuring Wi-Fi Protected Access (NSM Procedure)
To configure Wi-Fi protected access:
- In the NSM navigation tree, select Device Manager > Devices.
- Select a security device and then double-click the device on which you want to define forced timeout. The device configuration appears.
- In the device navigation tree, select Wireless.
- Configure the following wireless settings:
- For Select Specific Antenna, select Antenna diversity
- For Channel for wireless AP radio, select Auto.
- For Operation mode for AP, select 802.11b/g.
- For Transmit Power, select Full.
- For Data Rate for AP, select the best rate.
- In the main navigation tree, select Wireless>SSID.
- Select New and
configure the following settings:
- For Name, enter my-ssid.
- For Wireless Interface, select wireless 2.
- For Authentication/Encryption, select WPA2.
- For Select Encryption Method, select Auto.
- For auth-server-name, select rd_1_1_1.
- For Rekey Interval, select None. Rekey interval is the time that elapses before the group key for clients is updated.
- Configure the following WPA2-PSK settings:
- For Authentication/Encryption, select WPA2-PSK.
- For WPA2-PSK, select Passphrase. When enabled, you must configure a passphrase (8-63 ASCII characters) that permits access to the SSID.
- For Passphrase, set a password.
- For Encryption Method, select TKIP.
- For Rekey Interval, select Value.
- For Value, select a value. 1800 is the default.
- Click OK to apply the settings.
