• Downloads
• Configuring Dial-in Options on a Dialer Interface (NSM Procedure)    

• Related Topics
• Configuring a Dialer Interface (NSM Procedure)
• Configuring a USB Modem Interface (NSM Procedure)

Configuring Dial-in Options on a Dialer Interface (NSM Procedure)

To configure dial-in options on a dialer interface:

1. In the NSM navigation tree, select Device Manager > Devices.
2. Click the Device Tree tab and then double-click the device for which you want to configure dial-in options.
3. Click the Configuration tab. In the configuration tree, select Interfaces > Interfaces List.
4. Select the dialer interface and add or modify interface settings as specified in Table 1.
5. Click one:
   • OK—Saves the changes.
   • Cancel—Cancels the modifications.

Table 1: Dialer Interface for Dial-in Configuration Details

Option	Function	Your Action
Unit > Dialer Options > Incoming Map
Caller	Specifies the incoming map options for the dialer interface.	Select accept-all to accept all incoming calls. Select caller to accept calls from a specific caller ID.
Caller
Name	Specifies the caller ID to be accepted on the dialer interface.	Enter the caller ID.