Configuring the ILMI Protocol (NSM Procedure)
To configure the ILMI protocol in NSM:
- In the NSM navigation tree, select Device Manager > Devices.
- Click the Device Tree tab,
and then double-click the device to select it.
- Click the Configuration tab.
In the configuration tree, expand Protocols > ilmi.
- Select Traceoptions.
- Add or modify settings as specified in Table 1.
- Click one:
- OK—Saves the changes.
- Cancel—Cancels the modifications.
Table 1: Trace Options Configuration
Details
| Task |
Your Action |
Define tracing options.
|
- In the Comment box, enter the comment
for the traceoptions.
- Select the No Remote Trace check
box to disable remote tracing globally or for a specific tracing operation.
|
Specify the name of the file to
receive the output of the tracing operation and the maximum number
of trace files.
|
- Click File next to Traceoptions.
- In the Comment box, enter the comment
for the file.
- In the Filename box, enter the name
of the file to receive the output of the tracing operation.
- In the Size box, enter the maximum
size of each trace file, in kilobytes (KB), megabytes (MB), or gigabytes
(GB).
Range: 10240 through 1073741824
- From the Files list, select the maximum
number of trace files.
Range: 2 through 1000.
- Select one of the following:
- world-readable—To enable unrestricted
file access.
- no-world-readable—To restrict
file access to owner. This is the default setting.
|
Specify the tracing operation to
perform.
|
- Click Add new entry next to Flag.
- From the Name list, select the flag.
- database—Trace database events.
- routing-socket—Trace Routing
socket events.
- state—Trace state change events.
- debug—Trace debug messages.
- event—Trace event handler events.
- packet—Trace packet events.
- all—Trace all areas of code.
- In the Comment box, enter the comment
for the flag.
|
Published: 2009-08-23
