Technical Documentation

Configuring Interface set on the Routing Platform (NSM Procedure)

You can configure an interface set on the routing platform using this option.

To configure interface set in NSM:

  1. In the NSM navigation tree, select Device Manager > Devices.
  2. Click the Device Tree tab, and then double-click the device to select it.
  3. Click the Configuration tab. In the configuration tree, expand Interfaces.
  4. Select Interface Set.
  5. Add or modify settings as specified in Table 1.
  6. Click one:
    • OK—Saves the changes.
    • Cancel—Cancels the modifications.

Table 1: Interface Set Configuration Details

Task Your Action

Define the interface set.
  1. Click Add new entry next to Interface Set.
  2. Click interface-set.
  3. In the Name box, enter the name for the interface set.
  4. In the Comment box, enter the comment.

Apply the interface set to interfaces.
  1. Click interface next to interface-set.
  2. Click Add new entry next to Interface.
  3. In the Name box, enter the interface name.
  4. In the Comment box, enter the comment.
  5. Click Unit next to interface.
  6. Click Add new entry next to Unit.
  7. From the Name list, select the number of the logical unit.

    Range: 0 through 16,385

  8. In the Comment box, enter the comment.
  9. Click Vlan Tags Outer next to Interface.
  10. Click Add new entry next to Vlan tags Outer.
  11. From the Name list, select the outer VLAN ID.
  12. In the Comment box, enter the comment.

Published: 2009-08-23