Technical Documentation

Configuring a JSAM Resource Profile (NSM Procedure)

A JSAM resource profile configures JSAM to secure traffic to a client/server application. When you create a JSAM application resource profile, the JSAM client tunnels network traffic generated by the specified client applications to servers in your internal network.

To create a JSAM application resource profile:

  1. In the NSM navigation tree, select Device Manager > Devices. Click the Device Tree tab, and then double-click the Secure Access device for which you want to configure JSAM application resource profile.
  2. Click the Configuration tab, and select Users > Resource Profiles > SAM > Client Applications. The corresponding workspace appears.
  3. Click the New button and the New dialog box appears.
  4. Add or modify settings as specified in Table 1.
  5. Click one:
    • OK—Saves the changes.
    • Cancel—Cancels the modifications.

Table 1: Configuring JSAM Rosource Profile details

OptionFunctionYour Action
Settings tab

Name

Specifies a name for the resource profile.

Enter the name.

Description

Describes the resource profile.

Enter the description.

Type

Allows you to select either JSAM or WSAM to configure resource profile.

Select JSAM option to configure JSAM resource profile.
Settings tab > JSAM > Custom

Server Hostname or IP

Specifies the hostname or IP address of the remote server.

Enter the hostname or IP address.

Server Port

Specifies the port on which the remote server listens for client connections.

Enter the port.

Localhost IP

Specifies the IP address of the localhost.

Enter the IP address.

Client Port

Specifies the port on which JSAM should listen for client application connections.

Enter the port.

Create an access control policy allowing SAM access to these servers

Allows access to the list of servers specified in the Server Port column

Select the Create an access control policy allowing SAM access to these servers check box to enable this feature.

Allow JSAM to dynamically select an available port if the specified client port is in use

Allows JSAM to select an available port when the client port you specify is taken. The client application must allow you to specify the port number for the connection to use this option.

Select the Allow JSAM to dynamically select an available port if the specified client port is in use check box to enable this option.
Settings > Lotus Notes > Autopolicy: SAM Access Control > Rules tab

Name

Specifies the name of the policy.

Enter the name.

Resources

Specifies the application server to which this policy applies.

Enter the application resource name.

Action

Allows or denies user access to the resources.

Select either Allow or Deny from the Action drop–down list.

Settings > Microsoft Outlook/Exchange

New Application Servers

Specifies the hostname for the MS Exchange server.

Enter the hostname

Create an access control policy allowing SAM access to these servers

Enables user to access the server specified in the previous step, application servers (enabled by default).

Select the Create an access control policy allowing SAM access to these servers check box to enable this option.
Settings tab > NetBIOS File Browsing

New Application Servers

Specifies the fully qualified hostname for your application servers.

Enter the hostname.

Create an access control policy allowing SAM access to these servers

Allows user access the server specified in the previous step, application servers (enabled by default).

Select the Create an access control policy allowing SAM access to these servers check box to enable this option.
Settings > Roles tab

Roles Selections

Specifies the roles to which the resource profile applies.

Select the role and, then click Add to move the role from the Non-members to the Members list.