• Download PDFs
• Configuring Device Features  

• Related Topics
• About Device Configuration
• M-series and MX-series Device Configuration Settings Supported in NSM
• Example: Configuration of Interfaces for MPLS in the CLI and NSM

Configuring Device Features

You can configure JUNOS software features in NSM. Although the configuration screens rendered in NSM look different than the JUNOS command-line interface (CLI), the top-level configuration elements mostly correspond to commands in the CLI.

Note: For detailed information about configuring specific features for M-series and MX-series devices, see the appropriate JUNOS software configuration guide.

To configure a device that has been added, imported, or modeled in NSM:

1. In the navigation tree, select Device Manager > Devices.
2. Open the device configuration using one of the following methods:
   • Double-click the device object in the security device tree or the device list.
   • Select the device object and then click the Edit icon.
   • Right-click the device object and select Edit.
3. Select the Configuration tab.

   The device configuration tree appears in the left pane.

4. In the device navigation tree, select a function heading to see device parameters, and then select the configuration parameter you want to configure.
5. Make your changes to the device configuration, then choose one of the following:
   • Click OK to save your changes and close the device configuration.
   • Click Apply to save your changes and continue making changes.
   • Click Cancel to discard all changes and close the device configuration.

To reset a device feature to its default value, right-click on the feature name in the device editor and select Revert to template/default value.