Configuring the Infranet Controller as an SNMP Agent (NSM Procedure)
The Infranet Controller supports
Simple Network Management Protocol version 2 (SNMPv2), implements
a private MIB, and defines its own traps. To enable your network management
station to process these traps, you need to download the Juniper Networks
MIB file and specify the appropriate information to receive the traps.
To specify SNMP settings:
- In the NSM navigation tree, select Device Manager> Devices.
- Click the Device Tree tab,
and then double-click the Infranet Controller for which you want to
specify SNMP settings.
- Click the Configuration tab.
In the configuration tree, select System > Log/Monitoring
> SNMP.
- Add or modify settings as specified in Table 1.
- Click one:
-
OK—Saves the changes.
-
Cancel—Cancels the modifications.
Table 1: SNMP Agent
Configuration Details
|
Option
|
Function
|
Your Action
|
| Trap
Settings |
|
Check Frequency
|
Specifies the check frequency trap threshold .
|
Enter the check frequency trap threshold in seconds.
|
|
Log Capacity
|
Specifies the log capacity trap threshold .
|
Enter a percentage for the log capacity trap threshold.
|
|
Users
|
Specifies the users trap threshold.
|
Enter a percentage for the users trap threshold.
|
|
Memory
|
Specifies the memory trap threshold.
|
Enter a percentage for the memory trap threshold.
|
|
Swap Memory
|
Specifies the swap memory trap threshold.
|
Enter a percentage for the swap memory trap threshold.
|
|
Disk
|
Specifies the disk trap threshold.
|
Enter a percentage for the disk trap threshold.
|
|
CPU
|
Specifies the CPU trap threshold.
|
Enter a percentage for the CPU trap threshold.
|
|
Send Traps for Critical Log Events
|
Specifies that SNMP traps will be sent for critical log
events.
|
Select this option to send SNMP traps for critical log
events.
|
|
Send Traps for Major Log Events
|
Specifies that SNMP traps will be sent for major log
events.
|
Select this option to send SNMP traps for major log events.
|
|
SNMP Servers
|
Specifies the servers to which you want the Infranet
Controller to send the traps that it generates.
|
Enter the hostname or IP address, port number, and community.
|
| Settings |
|
SNMP Queries
|
Specifies the SNMP queries for the Infranet Controller.
|
Select this option.
|
|
SNMP Traps
|
Specifies the SNMP traps for the Infranet Controller.
|
Select this option.
|
|
System Name
|
Specifies the agent name.
|
Enter the system name.
|
|
System Location
|
Specifies the agent location.
|
Enter the system location.
|
|
System Contact
|
Specifies the agent contact information.
|
Enter the system contact information.
|
|
Community
|
Specifies the agent community.
|
Enter a string.
|
