• Downloads
• Creating Parameter Instances    

• Related Topics
• Parameter Instances for QoS Clients Overview
• For information about creating QoS parameter instances for Service Manager, see JUNOSe Broadband Access Configuration Guide
• atm-vp qos-parameter
• atm vp-tunnel
• encapsulation vlan
• interface
• qos-parameter
• svlan id
• svlan qos-parameter

Creating Parameter Instances

You can create QoS parameter instances globally, for an interface, or for a subinterface.

Creating a Global Parameter Instance

To create a global parameter instance:

• Create a parameter instance in Global Configuration mode.

  host1(config)#qos-parameter max-subscriber-bandwidth 6000000

Creating a Parameter Instance for an Interface

To create a parameter instance for an interface:

1. Specify an interface.

   host1(config)#interface atm 11/0.1

   host1(config)#interface gigabitEthernet 2/0

2. Specify the parameter name and the value.

   host1(config-subif)#qos-parameter max-subscriber-bandwidth 6000000

Creating a Parameter Instance for an ATM VP

Use this procedure to attach a parameter instance to a VP on the interface. Optionally, use the qos-profile keyword to attach a parameter instance to a QoS profile.

To create a parameter instance for an ATM VP:

1. Configure the ATM VP.

   host1(config)#interface atm 2/0

   host1(config-if)#atm vp-tunnel 4

2. Do either of the following:
   • Attach the parameter instance to an ATM VP on the interface.

     host1(config-if)#atm-vp 4 qos-parameter max-subscriber-bandwidth 375000

   • Attach the parameter instance and associate with the QoS profile.

     host1(config-if)#atm-vp 4 qos-profile video qos-parameter max-subscriber-bandwidth 375000

Creating a Parameter Instance for an S-VLAN

Use this procedure to attach a parameter instance to a specified S-VLAN ID on the interface. Optionally, use the qos-profile keyword to attach a parameter instance to a QoS profile.

To create a parameter instance for an S-VLAN:

1. Specify the Ethernet interface and create the VLAN.

   host1(config)#interface gigabitEthernet 3/0

   host1(config-if)#encapsulation vlan

   host1(config-if)#interface gigabitEthernet 3/0.1

2. Specify the S-VLAN ID.

   host1(config-if)#svlan id 1 202

3. Attach the parameter instance to an S-VLAN ID on the interface.

   host1(config-if)#svlan 202 qos-parameter max-subscriber-bandwidth 6000000