show ip tunnel-route [ vrf vrfName ] [ destination [ ipMask ] [ detail ] ] [ all ] [ protocol ] [ filter ]
Release Information
Command introduced in JUNOSe Release 7.1.0.
Description
Displays current state of the IPv4 tunnel routing
table.
Options
vrfName—Contents of the IPv4
tunnel routing table associated with a VRF
destination—IP address or
domain name of the host to show
ipMask—IP mask of the specific
address to show
detail—Displays detailed information about the specific
prefix
all—Displays all routes in the IPv4 tunnel routing
table inserted from all protocols, not just the best routes
protocol—One of the following
protocols for which you want to display the best route or all routes
in the tunnel routing table; no routes are displayed if routes for
the specified protocol are not present in the tunnel routing table
Note:
Other protocol options are available in the CLI, but they
are not applicable to the tunnel routing table.
bgp-tunnel—Displays the BGP tunnel routes in the
tunnel routing table
ldp—Displays the LDP tunnel routes in the tunnel
routing table
rsvp—Displays the RSVP tunnel routes in the tunnel
routing table
