Specifies the length of the RTR probe. There is
no no version.
rtrIndex—Number of the operation
to be configured, in the range 1–4294967295; no default
lifeValue—Number of operations
or maximum TTL in the range 1–2147483647; value that depends
on the type of the RTR entry
If the type of the RTR entry is echo, lifeValue relates to the number of operations sent until a test finishes.
The default value is 90. If you use 60 operations * 60 seconds, the
frequency between each operation that a test completes is 3,600 seconds
If the type of the RTR entry is pathEcho, lifeValue relates to the maximum number of hops used by the traceRoute trap.
The default value is 30. If you use 30 (as the maximum hops) * 3 (operations
per hop) * 60 seconds frequency between each operation, a test is
completed within 3,600 seconds. If a destination is reached in fewer
than 30 hops, the test is completed earlier.