no path pathChannel ds3 ds3Channel t1 t1Channel/subchannel
Release Information
Command introduced before JUNOSe Release
7.1.0.
Description
Assigns a range of DS0 timeslots to a subchannel
as a single data stream for a T1 channel on a DS3 signal. This command
applies to a T1 channel on a DS3 over channelized SONET interface.
You can optionally specify a line speed that applies to all DS0 timeslots
assigned to a subchannel. The no version
deletes the fractional T1 circuit.
Options
pathChannel—Number, in the
range 1–2147483648, that identifies the path
ds3Channel—Number, in the
range 1–3, that identifies the DS3 channel
t1Channel—Number, in the range
1–28, that identifies the T1 channel
subchannel—Fractional T1 interface,
in the range 1–24
range—Timeslots assigned to
the T1 channel in the range 1–24; a dash represents a range
of timeslots, and a comma separates timeslots. For example, 1-10,
15-18 assigns timeslots 1–10 and 15–18.
speed—Specifies the data rate for the T1 channel,
either 56 Kbps or 64 Kbps; default value is 64 Kbps
