no debug ip mbgp [ in | out ] [ peerAddress [ peerAddressMask ] ] [ bgpLog ] [ router routerName ] [ filtering-router filteringRouterName ] [ accessClassName ] [ route-map mapName ]
Release Information
Command introduced before JUNOSe Release
7.1.0.
Description
Shows information about the selected variable.
The no version disables the display.
Options
in—Displays information for inbound events
out—Displays information for outbound events
peerAddress—IP address of
BGP peer for which information is displayed
peerAddressMask—Network mask
of BGP peer for which information is displayed
bgpLog—BGP log of interest;
one of the following options:
dampening—BGP dampening event; route is suppressed
or no longer suppressed by route-flap dampening
events—BGP finite state machine events and transitions
keepalives—BGP keepalive message events
next-hops—BGP next hop events
updates—BGP routing table update events
routerName—Name of the virtual
router that owns the BGP router for which information is being displayed
filteringRouterName—Name of
the virtual router that owns the access class and route map parameters
accessClassName—Name of an
access list to filter output
mapName —Name of a route map
to filter output
severity—Specifies the minimum severity of the log
messages displayed for the selected category; described either by
a descriptive term—severityValue—or
by a corresponding number—severityNumber—in the range 0–7; the lower the number, the higher the
priority:
emergency or 0—System unusable
alert or 1—Immediate action
needed
critical or 2—Critical condition
exists
error or 3—Error condition
warning or 4—Warning condition
notice or 5—Normal but significant
condition
info or 6—Informational message
debug or 7—Debug message
verbosityLevel—Verbosity of
the log category's messages; can be any of the following:
low—Terse
medium—Moderate detail
high—Verbose
secondary—Indicates that the specified filter conditions
for the log are imposed in addition to any that were previously specified;
if omitted, the specified filter conditions replace any that were
previously specified
