To display information about a prefix configured for
all address families or for a specific address family other than the
route-target address family:
show ip bgp [ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4
vrf vrfName ] network [ networkNumber [ [ mask ] networkMask ] ] [ filter ]
To display information about about a prefix configured for the
route-target address family:
show ip bgp route-target signaling network [ rtfPrefix ] [ filter ]
Release Information
Command introduced before JUNOSe Release
7.1.0. route-target signaling keywords and rtMemNlri variable added in JUNOSe
Release 9.0.0. rtMemNlri variable replaced by rtfPrefix variable in
JUNOSe Release 9.1.0.
Description
Displays information about a potentially originated
prefix that was configured with the network command.
Options
ipv4 unicast—Specifies the IPv4 unicast address
family and routing table; the default option
ipv4 multicast—Specifies the IPv4 multicast address
family and routing table
vpnv4 all—Specifies the IPv4 VPN address family
and all IPv4 VPN routing and forwarding instances
vpvn4 vrf vrfName—Specifies
the IPv4 VPN address family and only the IPv4 VPN routing and forwarding
instance with the name vrfName
networkNumber—IP address of
the network for which you want information displayed; if no network
is specified, the fields are displayed for all networks
networkMask—Address mask to
be applied to the network address
route-target signaling—Displays information for
only the route-target address family
rtfPrefix—Prefix representing
the route-target membership NLRI (RT-MEM-NLRI), in the format asNumber:extendedCommunity/prefixLength (for
example, 320:320:524/36) where:
asNumber—AS number for origin
of route target information, in the range 1–4294967295
extendedCommunity—Two-part
number in the format number1:number2 that identifies an extended community of VPNs, in the format number1:number2, where:
number1—Autonomous system
(AS) number, in the range 1–4294967295, or an IP address
number2—Unique integer, in
the range 1–4294967295; 32 bits if number1 is a 16-bit AS number; 16 bits if number1 is an IP address or a 32-bit AS number
prefixLength—Number that specifies
the length of the route prefix, in the range 32–96
