Enables you to transmit an MDL message on a DS3
signal. This command applies to a DS3 over channelized SONET interface.
The no version disables transmission of
the specified message or all messages.
Options
pathChannel—Number, in the
range 1–2147483648, that identifies the path
ds3Channel—Number, in the
range 1–3, that identifies the path
path-id—Transmits a path identification message
every second; default value is disabled
idle-signal—Transmits an idle signal message every
second; default value is disabled
test-signal—Transmits a test signal message every
second; default value is disabled
