no path pathChannel { ds1 | e1 } tributaryIdentifier framing
Release Information
Command introduced before JUNOSe Release
7.1.0.
Description
Configures the framing format for a DS1 or an E1
signal when DS1/E1 is configured over channelized SONET and SDH interfaces.
The no version restores the default value.
Options
pathChannel—Number, in the
range 1–2147483648, that identifies the path
tributaryIdentifier—Specifier
for the tributary in the format pathChannel { ds1 | e1 } pathPayload/tributaryGroup/tributaryNumber
pathPayload—Payload number
for the path; value is 1 for SONET and in the range 1–3 for
SDH
tributaryGroup—Number, in
the range 1–7, that identifies the group within the path
tributaryNumber—Number of
the tributary within the tributary group; the value is in the range
1–4 if the tributary type is vt15 or tu11 and in the range 1–3
if the tributary type is tu12
framingType—One of the following
types:
crc4—Cyclic redundancy check (default for E1); not
available for T1
no-crc4—No cyclic redundancy check; not available
for T1
esf—Extended superframe (T1 default); not available
for E1
