Configuring IGMP

IP hosts use Internet Group Management Protocol (IGMP) in IPv4 to report their multicast group memberships to neighboring routers. Similarly, multicast routers, such as an E-series router, use IGMP to discover which of their hosts belong to multicast groups.

This chapter describes how to configure IGMP for IP multicast on an E-series router; it contains the following sections:

• IGMP Overview
• Platform Considerations
• References
• Before You Begin
• Configuring Static and Dynamic IGMP Interfaces
• Enabling IGMP on an Interface
• Configuring IGMP Settings for an Interface
• Specifying Multicast Groups
• Assigning a Multicast Group to an Interface
• Configuring Group Outgoing Interface Mapping
• Configuring Access Node Control Protocol for IGMP
• Configuring SSM Mapping
• Limiting the Number of Accepted IGMP Groups
• Including and Excluding Traffic
• Configuring Explicit Host Tracking
• Accepting IGMP Reports from Remote Subnetworks
• Disabling and Removing IGMP
• Monitoring IGMP
• IGMP Proxy Overview
• Configuring IGMP Proxy
• Establishing the IGMP Proxy Baseline
• Monitoring IGMP Proxy