[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

Monitoring ANCP

You can display ANCP information with the following commands.

show adjustment-factor

Use to display the configured values for the adjustment factor applied to the upstream data rate and downstream data rate reported by ANCP for each DSL type. The adjustment factor is used to generate an accurate QoS shaping rate.
Field descriptions
- L2C QoS Adjustment Rates—List of all DSL types and the corresponding adjustment factor for each
- ADSL1—Adjustment factor for the ADSL1 DSL type
- ADSL2—Adjustment factor for the ADSL2 DSL type
- ADSL2+—Adjustment factor for the ADSL2+ DSL type
- VDSL—Adjustment factor for the VDSL DSL type
- VDSL2—Adjustment factor for the VDSL2 DSL type
- SDS—Adjustment factor for the SDS DSL type

Example 1—Displays the adjustment factor for each DSL type

host1(config-l2c)#show adjustment-factor
  L2C QoS Adjustment Rates:
  ADSL1:  45
  ADSL2:  55
  ADSL2+: 100
  VDSL:   100
  VDSL2:  55
  SDS:    100

Example 2—Displays the adjustment factor for a specific DSL type verification criteria
```
host1(config-l2c)#show adjustment-factor vdsl2
  VDSL2:11
```
See show adjustment-factor.

show l2c

Use to display information about the ANCP configuration on the router.
Field descriptions
- Current timeout—Configured session timeout (in seconds)
- Qos adaptive mode—Whether QoS adaptive mode is enabled (true) or disabled (false)

Example

host1#show l2c
L2C:
  Current session timeout: 25 seconds
  Qos adaptive mode: false

show l2c discovery-table

Use to display ANCP discovery table entries.
Use the optional delta keyword to display baseline statistics.
Field descriptions
- Neighbor—Neighbor name
- Access-Loop-Id—Access loop identifier
- Down/Upstream (kbps)—Downstream and upstream rates, in Kbps
- State—State of the access loop, UP or DOWN
- Actual-Data-Rate-Upstream—Actual upstream data rate, in Kbps
- Actual-Data-Rate-Downstream—Actual downstream data rate, in Kbps
- Attainable-Data-Rate-Upstream—Attainable upstream data rate for this line, in Kbps
- Attainable-Data-Rate-Downstream—Attainable downstream data rate for this line, in Kbps
- Line-State—State of the access loop (SHOWTIME or IDLE)
- Dsl-Type—Type of DSL
- Total Line Attributes—Total number of line attributes reported

Example 1

host1# show l2c discovery-table brief
   Neighbor             Access-Loop-Id         Down/UpStream(kbps) State
--------------- ------------------------------ ------------------- -----
ACCESSNODE_10   Accessnode_10 atm 2/2:0.0      8064/1184           UP
ACCESSNODE_10   Accessnode_10 atm 2/32:0.0     8064/1184           UP
ACCESSNODE_10   Accessnode_10 atm 2/33:0.0     8064/1184           DOWN
ACCESSNODE_10   Accessnode_10 atm 2/34:0.0     8064/1184           DOWN

Example 2—Topology discovery table for a particular end-user-id

host1# 
show l2c discovery-table end-user-id "Accessnode_10 atm 2/3:0.0"Access-Loop-Id: Dslam_10 atm 2/3:0.0     UP
  Neighbor: ACCESSNODE_10
  Actual-Data-Rate-Upstream: 1152(kbps)
  Actual-Data-Rate-Downstream: 8064(kbps)
  Attainable-Data-Rate-Upstream: 1176(kbps)
  Attainable-Data-Rate-Downstream: 9376(kbps)
  Line-State: 1(SHOWTIME)
  Dsl-Type: 0(Invalid transmission type)
  Total Line Attributes: 6

Example 3—Topology discovery table for a particular neighbor

host1# show l2c discovery-table neighbor "Accessnode_10"
Access-Loop-Id: Dslam_10 atm 10/5:0.0    DOWN
  Neighbor: DSLAM_10
  Line-State: 2(IDLE)
  Dsl-Type: 0(Invalid transmission type)
  Total Line Attributes: 2
Access-Loop-Id: Dslam_10 atm 10/6:0.0    DOWN
  Neighbor: DSLAM_10
  Line-State: 2(IDLE)
  Dsl-Type: 0(Invalid transmission type)
  Total Line Attributes: 2
Access-Loop-Id: Dslam_10 atm 10/7:0.0    DOWN
  Neighbor: DSLAM_10
  Line-State: 2(IDLE)
  Dsl-Type: 0(Invalid transmission type)
  Total Line Attributes: 2
Access-Loop-Id: Dslam_10 atm 2/0:0.0     UP
  Neighbor: DSLAM_10
  Actual-Data-Rate-Upstream: 1184(kbps)
  Actual-Data-Rate-Downstream: 8064(kbps)
  Attainable-Data-Rate-Upstream: 1184(kbps)
  Attainable-Data-Rate-Downstream: 9408(kbps)
  Line-State: 1(SHOWTIME)
  Dsl-Type: 0(Invalid transmission type)
  Total Line Attributes: 6

See show l2c discovery-table.

show l2c label

Use to display information about known ANCP labels on the router.
Use the neighbor-input keyword to display labels for input ports.
Use the neighbor-output keyword to display labels for output ports.
Use the brief keyword to show limited information.
Field descriptions
- Interface—Interface on which ANCP is configured
- End-User-Id—Output label associated with the interface
- Neighbor—Neighbor associated with the interface
- Max-Branches—Maximum number of branches to which the ANCP interface can subscribe
- Peer-Attach-Id—Input label associated with the interface

Example 1

host1# show l2c label
Interface: ATM2/0.300
  End-User-Id: Accessnode_10 atm2/2:0.0   
  Neighbor: accessnode _1002
  Max-Branches: 5
Interface: ATM2/0.301
  End-User-Id: Accessnode_10 atm2/3:0.0   
  Neighbor: accessnode_1002
  Max-Branches: 5
Interface: ATM2/0.302
  End-User-Id: Accessnode_10 atm2/4:0.0   
  Neighbor: accessnode _1002
  Max-Branches: 5
Interface: ATM2/0.303
  End-User-Id: Accessnode_10 atm2/5:0.0   
  Neighbor: accessnode _1004
  Max-Branches: 5
Interface: ATM2/0.304
  End-User-Id: Accessnode_10 atm2/6:0.0   
  Neighbor: accessnode _1004
  Max-Branches: 5

Example 2

host1# show l2c label brief
        Interface                          End-User-Id                        Neighbor    
-------------------------         -------------------------                  ----------------
ATM4/0.300                         Accessnode_10 atm2/2:0.0                  accessnode_1002      
ATM4/0.301                         Accessnode_10 atm2/3:0.0                  accessnode_1002
ATM4/0.302                         Accessnode_10 atm2/4:0.0                  accessnode_1002
ATM4/0.303                         Accessnode_10 atm2/5:0.0                  accessnode_1004
ATM4/0.304                         Accessnode_10 atm2/6:0.0                  accessnode_1004
Interface                        Peer-Attach-Id      
-------------------------    -------------------------
ATM4/0.11                    Accessnode_10 atm3/2:0.10
ATM4/0.12                    Accessnode_10 atm3/3:0.10                
ATM4/0.13                    Accessnode_10 atm3/4:0.10
ATM4/0.14                    Accessnode_10 atm3/5:0.10

Example 3

host1# show l2c label neighbor-input brief
        Interface                Peer-Attach-Id      
-------------------------    -------------------------
ATM4/0.11                    Accessnode_10 atm3/2:0.10
ATM4/0.12                    Accessnode_10 atm3/3:0.10
ATM4/0.13                    Accessnode_10 atm3/4:0.10
ATM4/0.14                    Accessnode_10 atm3/5:0.10

See show l2c label.

show l2c neighbor

Use to display information about all known ANCP neighbors or specified ANCP neighbors on the router along with their configurations.
Use the brief keyword to display limited information.
Use the summary keyword to display the number of active neighbors.
Field descriptions
- Neighbor Name—Name associated with the neighbor
- Neighbor Id—ID associated with the neighbor
- Maximum Branches—Maximum number of branches this neighbor can have
- Topology Discovery—Whether topology discovery is enabled (true) or disabled (false)
- Maximum Discovery Entries—Maximum number of discovery table entries allowed
- Ip address—IP address of the neighbor
- TCP port—TCP port associated with this neighbor
- Connection Time—Date and time at which this neighbor was connected
- Add Branches Sent—Number of add branch messages sent to this neighbor
- Delete Branches Sent—Number of delete branch messages sent to this neighbor
- Line-configurations—Number of line configurations sent to this neighbor
- OAM Loopback Requests Sent—Number of OAM loopback requests sent to this neighbor
- OAM Loopback Responses Received—Number of OAM loopback responses received from this neighbor
- Protocol State—Protocol state of this neighbor
- Number of configured neighbors—Number of configured ANCP neighbors
- Number of Neighbors in GSMP_ESTAB state—Number of ANCP neighbors that are in an established GSMP state
- Number of neighbors in GSMP_EMPTY state—Number of ANCP neighbors that are in an unestablished GSMP state

Example 1

host1#show l2c neighbor name accessnode_1002
Neighbor Name: accessnode_1002
  Neighbor Id: 0abc.0abc.1002
  Maximum Branches: 10
  Topology Discovery: true
  Maximum  Discovery Entries: 10000
  Ip address: 1.1.1.2
  TCP port: 1025
  Connection Time: 03/02/2006 11:06:16
  Add Branches Sent: 0
  Delete Branches Sent: 0
  Line-configurations: 0
  OAM Loopback Requests Sent: 0
  OAM Loopback Responses Received: 0
  Protocol State: GSMP_ESTAB

Example 2

host1#show l2c neighbor brief 
        Name           Mac Address     Remote Address   Protocol State 
-------------------- ---------------- ---------------- ----------------
accessnode1          0abc.0abc.0abc   null             EMPTY

Example 3

host1(config)#show l2c neighbor summary
L2C:
  Number of configured Neighbors: 1
  Number of Neighbors in GSMP_ESTAB state: 1
  Number of neighbors in GSMP_EMPTY state: 0

See show l2c neighbor.

show l2c statistics

Use to display information about the ANCP statistics.
Field descriptions
- Current session timeout—Configured session timeout (in seconds)
- Discovery—State of topology discovery (Enabled or Disabled)
- Number of configured routers—Number of ANCP configured routers
- Number of neighbors—Number of ANCP neighbors
- Number of active neighbors—Number of active ANCP neighbors
- Number of end-user-ids—Number of ANCP end user IDs (output labels)
- Number of peer-attachment-ids—Number of ANCP peer attachment IDs (input labels)
- Number of add-branches—Number of ANCP branches added
- Number of delete-branches—Number of ANCP branches deleted

Example

host1#show l2c statistics
L2C:
Current session timeout: 25 seconds
  Discovery: Enabled
  Number of configured routers: 1
  Number of neigbhors: 5
  Number of active neighbors: 1
  Number of end-user-ids: 25
  Number of peer-attachment-ids: 39
  Number of add-branches: 0
  Number of delete-branches: 0

See show l2c statistics.

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]